Licensed Roofing Largo


Tapered Flat Roof Contractor by Augusto Roofing

Call us for a complimentary quote and also more information.

Phone: (727) 518-ROOF (7663)


Tapered Flat Roofing Installation Contractor Service Company


AUGUSTO ROOFING Your storm proofer company

A tapered roof system is where the slope or ‘pitch’ of the roofing system is created by the insulation where the roofing system is flat, to enable water to drain off. Low Slope polyisocyanurate roofing system insulation or tapered iso for short, is made from the very same ridge foam product that typical polyiso roofing system insulation is made from. Normal iso board can be found in flat sheets and also in a number of different thicknesses to consist of tapered. It can be a complexed procedure to slope a flat roofing system utilizing this system, specifically where 3 sides integrated. However there’s a mathematical formula, or technique to the insanity, as we like to call it, that brings all the items in position which ever before flat roofing system arrangement we determine.

As an example, below’s a little bit of mathematics within a tapered system. Tapered Sheet is marketed in 4′ x 4′ items or panels that change thicknesses over 4′ range. The quantity of the adjustment in density in each panel is a 1/4″ per foot. This indicates that for every foot of range the iso obtain 1/4 “thicker.


There are 3 sorts of sloped panels made.

X panel measures 1/2″ to 1 1/2 “in density

Y Panel procedure 1 1/2″ to 2 1/2 “in density

Z Panel procedure 2 1/2 to 3 1/2 in density

Then as an example an X panel begins at 1/2″ density and also boosts a 1/4″ in density every foot. Considering that the item of iso is 4′ long, the density increase will be equal to 1/4″ times 4 or a surge of 1″ over the 4′ range (1/2 to 1/ 12″ )Flat roofing professionals can after that prepare the sloped insulation to move water towards roofing system drains, scuppers, or gutters.

At this 1/4 ? slope per foot, there are only so many panels available that can get to a range of 12 ?. If your flat roofing system is larger, the following section can utilize the very same collection of panels after installing a 3 ? flat panel, one that you place those very same panels in addition to. This indicates the following 12 ? after the initial 24 ? would certainly need 2 3 ? flat panels under the following collection of spilling panels.

Currently photo realize this, some residences have 2 and also 3 sides of roof shingles involving a flat roofing system. Each side where the roof shingles fulfill the flat the slope requires to run in the very same downward slopping direction. This indicates that for a 3 sided roofing system the tapper will move to the center while still sloped to the 4th side and also off the roofing system. This is where the insanity can be found in, however the good news is there’s mathematics entailed to every inch. Don’t worry, we have you covered and also can deal with any arrangement your roofing system brings us.

There’s a 15 to 20 year warranty to CertainTeed tapered iso systems.

Roofing Asphalt Singles Contractor Largo

Roofing Shingles Company Largo

Low Slope Flat Roof Installer

Roofing Shingles Company
Asphal Shingles Roofing Largo
Tapered Flat Roof Installation
Tapered Roof System
Flat Roofing